Not sure which symptom fits? Use the Appliance Problem Checker to choose the appliance and problem, review safe checks, and see the most relevant next step.

Oven not heating or burner not working? Use the Oven Not Heating & Burner Problem Checker to compare settings, power, door, gas-burner, shared-supply, and heating-system clues.

Common Oven, Stove & Range Problems in Tallahassee, FL

Oven, stove, and range problems often show up as no heat, incorrect temperatures, burners that will not ignite or heat, controls that do not respond, a door that will not close properly, power problems, or error codes. The symptom helps narrow the issue, but it usually does not identify the failed component by itself.

Seeing an error code? Use the Appliance Error Code Lookup for supported manufacturer-documented codes. If you need the exact model first, use the Appliance Model Number Finder.

If you need local help, see our oven, stove and range repair in Tallahassee page. If you are deciding whether the repair makes financial sense, see our oven, stove and range repair cost and repair-vs-replace guide.

1. Oven Will Not Heat

An oven that powers on but does not heat can have several possible causes. Electric ovens can involve a heating element, sensor, thermostat, control board, wiring, or power-supply issue. Gas ovens can involve an igniter, gas valve, sensor, control, or gas-supply problem.

• Confirm the oven is receiving power.
• Check whether the display and controls respond.
• Note whether the oven heats at all or stays completely cold.
• For gas models, note whether you hear clicking or see ignition attempts.

2. Oven Temperature Is Too High or Too Low

Temperature problems can involve calibration, the temperature sensor, thermostat, heating element, igniter, airflow, or controls. A noticeable difference between the selected temperature and actual oven temperature is more useful than judging only by cooking time.

• Use an appropriate oven thermometer if you want to compare actual temperature with the setting.
• Check whether the temperature error is consistent or varies from cycle to cycle.
• Note whether preheating takes much longer than usual.

3. Gas Burner Clicks but Will Not Ignite

A gas burner that clicks but does not light can have moisture or debris around the burner, an igniter problem, switch issue, wiring fault, gas-supply issue, or another burner-system problem.

• Make sure the burner cap is positioned correctly if your model uses removable caps.
• Check for visible food residue or moisture around the burner after the appliance is cool.
• Note whether one burner or all burners are affected.

Do not disassemble gas valves, regulators, or internal gas components unless qualified.

4. Electric Burner Will Not Heat

An electric burner that stays cold can involve the burner element, receptacle, switch, wiring, controls, or power supply. The exact components depend on whether the stove uses coil elements, a smooth glass cooktop, or induction.

If multiple burners fail at once, a shared power or control issue may be more likely than several separate burner failures.

5. Burner Gets Too Hot or Will Not Turn Down

A burner that stays on high or does not respond correctly to the control setting can involve the burner switch, sensor, control board, or wiring. Stop using the affected burner if it cannot be controlled normally.

6. Oven or Range Will Not Turn On

If the entire appliance appears dead, possible causes include the breaker, outlet, power cord, terminal connection, thermal device, control board, wiring, or another internal electrical fault.

• Check the breaker or fuse panel.
• Confirm the appliance is plugged in if the connection is accessible.
• Look for a control-lock or child-lock setting.
• Note whether any clock, light, or display remains active.

Avoid opening electrical panels or testing high-voltage components unless qualified.

7. Oven Door Will Not Close Properly

An oven door that does not close or seal correctly can affect cooking performance and heat retention. Possible causes include hinges, springs, door alignment, a damaged gasket, racks positioned incorrectly, or an obstruction.

• Check that no rack or pan is preventing the door from closing.
• Inspect the visible gasket for obvious damage.
• Note whether the door hangs unevenly or feels loose.

8. Oven Light, Display, or Controls Do Not Work Correctly

Control and display problems can involve the user interface, control board, wiring, thermal devices, power supply, or switches. A single failed light is different from an appliance with a blank display and no response.

Write down any error code or unusual display message before resetting the appliance.

9. Oven Takes Too Long to Preheat

Slow preheating can be related to a weak heating element, failing igniter, temperature sensor, power-supply issue, door-seal problem, or control fault. Some ovens also preheat differently depending on selected cooking mode.

10. Food Cooks Unevenly

Uneven cooking can come from heating-element problems, convection-fan issues, rack position, sensor or thermostat problems, poor door sealing, or normal hot spots inside the oven.

If the problem is new and consistent across different foods and rack positions, the appliance may need diagnosis.

11. Oven or Stove Makes Unusual Noises

Some sounds are normal, including relays clicking, fans running, and metal expanding as it heats. New buzzing, grinding, rattling, repeated clicking, or fan noise can point to a component that deserves inspection.

• Repeated clicking on a gas burner: may indicate ignition trouble.
• Grinding or scraping from a convection oven: can involve the fan or motor.
• Buzzing: may come from electrical or control components.

12. Oven or Range Shows an Error Code

Error codes vary by brand and model. They can point to temperature sensors, door locks, controls, communication faults, overheating, ignition systems, or other issues. Write the code down exactly as shown before resetting the appliance.

Include the brand, model number, and error code in your repair request. See the appliance brands page for more on brand and model identification.

Safe Checks Before Requesting Oven, Stove or Range Repair

• Confirm the appliance has power.
• Check the breaker or fuse panel.
• Look for a control-lock setting.
• Make sure the oven door closes fully.
• Confirm burner caps are seated correctly on gas models, if applicable.
• Write down any error code.
• Note whether one burner, the oven, or the entire appliance is affected.
• For temperature issues, compare actual oven temperature with the selected setting using an appropriate thermometer.
• Stop using the appliance if you smell gas, see sparking, smell burning, or cannot control the heat.

Avoid disassembling gas valves, bypassing safety devices, opening electrical panels, or working on high-voltage components unless you are qualified to do so.

When to Request Oven, Stove or Range Repair

Request service when the oven repeatedly fails to heat correctly, burners will not ignite or heat, controls do not respond, the door will not seal, error codes keep returning, or the appliance shows electrical or gas-related symptoms.

For local service information, visit Oven, Stove & Range Repair in Tallahassee, FL.

Repair or Replace the Oven, Stove or Range?

The symptom alone should not determine whether the appliance is replaced. A no-heat or burner problem can come from both comparatively simple parts and more expensive control, wiring, glass, or gas-system failures.

Age, repair history, fuel type, failed component, parts availability, installation constraints, overall condition, and the actual repair estimate all matter. See our full guide to oven, stove and range repair cost in Tallahassee and whether repair or replacement makes more sense.

Oven, Stove & Range Problem FAQs

Why is my oven not heating?

Possible causes include a heating element, igniter, thermostat, sensor, control board, power supply, wiring, or gas-system problem. The exact cause depends on the appliance type and symptom pattern.

Why does my gas stove keep clicking but not light?

Moisture, debris, burner-cap position, an igniter, switch, wiring, or gas-supply issue can all cause repeated clicking without ignition.

Why is my electric burner not heating?

Possible causes include the burner element, receptacle, switch, wiring, controls, or household power supply.

Why is my oven temperature inaccurate?

Calibration, temperature sensors, thermostats, heating elements, igniters, airflow, or control issues can all affect oven temperature.

Should I keep using a stove if a burner stays on high?

No. Stop using the affected burner if the heat cannot be controlled normally. A switch, sensor, control, or wiring issue may be involved.

---

Need Help With an Oven, Stove or Range Problem in Tallahassee?

Send the appliance brand, model number if available, whether it is gas or electric, ZIP code, error code if present, and a short description of the heating, ignition, burner, temperature, control, door, or power problem.